Plumber’s thread seal tape, also known as
Teflon tape or polytetrafluoroethylene (PTFE), is thin, white and sold in rolls
in hardware, plumbing and home improvement stores. The tape acts as a lubricant
during the pipe connecting process, creating a secure seal. It also helps
prevent water leaks at threaded pipe joint connection points. Proper
application of the plumber’s thread seal tape is necessary to prevent water
pressure problems and clogs.
Plumber’s thread seal tape, also known as
Teflon tape or polytetrafluoroethylene (PTFE), is thin, white and sold in rolls
in hardware, plumbing and home improvement stores. The tape acts as a lubricant
during the pipe connecting process, creating a secure seal. It also helps prevent
water leaks at threaded pipe joint connection points. Proper application of the
plumber’s thread seal tape is necessary to prevent water pressure problems and
clogs.
Grip the end of the tape with your fingers.
Press the end of the plumber’s thread seal tape against the pipe threads on the
male end of the pipe, at a distance of 1/8 inch from the bottom of the pipe.
Begin wrapping the plumber’s thread seal
tape around the male end of the pipe in the same direction that the threads are
going. Overlap ½ of the width of the plumber’s tape on each rotation, but do
not overlap the tape end on the first pass.
Continue to wrap the pipe threads with the
tape, holding the plumber’s tape taught as you go. Cover all of the pipe
threads with the tape while wrapping, slightly overlapping each row of tape as
you proceed to the next.
Stretch the tape on the final pass to tear
it from the spool. Firmly press the torn end of the plumber’s thread seal tape
against the pipe to secure.
Tips & Warnings
http://ptfe-tape.com
Do not use too much plumber’s tape. Two
passes on the initial round and one to two passes over the remaining pipe
threads (with a slight overlap) is all that is necessary. Too much tape on the
pipe will affect the connection, possibly causing a leak.
Never apply plumbing compound and plumbing
tape together. The combination will not create an appropriate seal.
The source from : http://ptfe-tape.com
http://ptfemachinery.com
